How to Build a 10×10 Shed – Foundation Special

One of the first answers to the question of how to build a 10×10 shed is to start with the foundation. It is also important to clarify the structural requirements for the foundation and other construction-related specifications prior to the start of a new shed building project. In this article, we put a finer point on both topics. Let’s start with foundations.

Why are foundations such an important component of the shed-building process? Foundations provide the shed a stable base upon which to rest. Not only does a foundation provide support, but it also protects a structure from damage as it settles during natural cycles of freezing and thawing.

On-Grade Foundations

This type of foundation is the easiest for do-it-yourself types because it is built directly onto the ground. Since there is no need to pour concrete or dig postholes here, these foundations are also known as “floating foundations.”

To get started laying an on-grade foundation, one must first place concrete blocks in evenly spaced, parallel rows. Some concrete blocks are hollow, so be sure to use the solid blocks for this project. Instead of block, pressure-treated timbers or skids are also acceptable building materials. Once leveled, the blocks or timbers are ready to support the weight of the wooden floor frame.

Permanent Foundations

A larger shed like a 10×10 can oftentimes require a permanent foundation. These foundations require a builder or experienced do-it-yourselfer build down to the frost line. Hence, this type of foundation is also referred to as “frost-proof” because it falls down to the frost line.

The frost line is the point in the ground below which the earth does not freeze during the winter months. Depending on the part of the country one calls home, the frost line can range from a couple of inches to over one foot. This information is typically documented in local building ordinances.

Ultimately, a local building inspector will decide the type of foundation required for a particular area and shed. A typical rule of thumb is to use an on-grade foundation when the building covers 200 square feet or less.

Get to Know your Building Inspector

Folks sometimes believe a building permit is not required to erect a small structure like a shed on personal property. However, a building permit is always required in these cases. In fact, the building inspector has the right to require a homeowner move or tear down a shed if it was constructed without a building permit on file.

There are a couple of different reasons the building inspector gets involved with sheds. A primary reason is safety. The building inspector will check that a structure is built to code.

Builders who do not follow local ordinances have been known to leave homeowners with structures that sink over time or blow over during strong storms. Roof collapse is also common when code is ignored. For specific building code requirements on how to build a 10×10 shed in your area, contact the municipal building department.

Would you like to know more about how to build a 10×10 shed? Visit us today at: http://woodworkingplansdesign.com/how-to-build-a-10×10-shed/

Would you like to know more about how to build a 10×10 shed? Visit us today at: http://woodworkingplansdesign.com/how-to-build-a-10×10-shed/

Author Bio: Would you like to know more about how to build a 10×10 shed? Visit us today at: http://woodworkingplansdesign.com/how-to-build-a-10×10-shed/

Category: Home Management
Keywords: How to Build a 10×10 Shed,build a 10×10 shed,shed plans 10×10

Leave a Reply